Analytical prediction model for fatigue crack growth in Fibre Metal Laminates with MSD scenario
Journal Paper
Wandong Wang, Calvin Rans, Rinze Benedictus
International Journal of Fatigue, 104:263-272;2017
2017
Analytical prediction model for non-symmetric fatigue crack growth in Fibre Metal Laminates
Journal Paper
Wandong Wang, Calvin Rans, Rinze Benedictus
International Journal of Fatigue, 103:546-556;2017
2017
Multiple-site damage crack growth behaviour in Fibre Metal Laminate structures
Supervised PhD Dissertation
Wandong Wang
PhD Dissertation, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Critical Parameters in Mode I Interlaminar Fracture Toughness Testing of Thermoplastic Composite Materials
Supervised MSc Thesis
Kenny R. Peters
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Disbond arrest in fibre metal laminates
Supervised MSc Thesis
Robert Hangx
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Fatigue crack growth in Selective Laser Melted Ti-6Al-4V
Supervised MSc Thesis
Jef Michielssen
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Fracture Toughness of Aerospace Structures: On the Use of Redundant Lattice Structures
Supervised MSc Thesis
Tijs de Boer
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Fatigue Crack Initiation Behaviour of Additive Manufactured Ti-6Al-4V
Supervised MSc Thesis
Thomas Cheylus
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Energy Absorption of Additively Manufactured Lattices: On biomimetic abstraction of structural principles toward increased energy absorption in lattice structures
Supervised MSc Thesis
Mika Bots
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Methods of Improving the Post Shear-Buckled Stiffness of Glare
Supervised MSc Thesis
Andrew Marshall
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Prediction methodology for fatigue crack growth behaviour in Fibre Metal Laminates subjected to tension and pin loading
Journal Paper
Wandong Wang, Calvin Rans, Zhinan Zhang, Rinze Benedictus
Composite Structures, 182:176-182;2017
2017
Strain Monitoring using a Rayleigh Backscattering System for a Composite UAV Wing Instrumented with an Embedded Optical Fiber
Journal Paper
P. Martinez Bueno, M. Martinez, C.D. Rans, R. Benedictus
Advanced Materials Research, 1135:1-19; 2016.
2016
An experimental investigation into pin loading effects on fatigue crack growth in Fibre Metal Laminates
Journal Paper
Zhinan Zhanga, Wandong Wang, Calvin Rans, Rinze Benedictus
Procedia Structural Integrity, 2:3361-3368; 2016.
2016
(Blended Learning)^2: Blending content- and learning-oriented objectives in a blended learning environment
Conference Paper
C.D. Rans, S. Teixeira De Freitas, J.M.J.F. van Campen, G.N. Saunders-Smits
in Proceedings of 44th SEFI Conference, Tampere, Finland, September 2016
2016
Comparative analysis of in-plane and out-of-plane mechanical behaviour of spot-welded and mechanically fastened joints in thermoplastic composites
Conference Paper
Tian Zhao, Genevieve Palardy, Irene Fernandez Villegas, Calvin Rans, Rinze Benedictus
in Proc. ECCM-17 Conference. Munich, Germany
2016
The effect of stress ratio on the fatigue behavior of additively manufactured porous biomaterials
Supervised MSc Thesis
Joep de Krijger
MSc Thesis, Dept. Materials Science & Engineering, Delft University of Technology
2016
An investigation into the fatigue behavior of micro-cracks in resin rich regions of composite laminates produced by liquid infusion
Supervised MSc Thesis
Evgeni S. Zhelyazkov
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2016
Long-term durability of adhesively bonded composite joints under quasi-static and fatigue loading
Conference Paper
C. Li, Z.Y. Wan, G. LaPlante, C.D. Rans, and G. Li
in Proc. 28th Symposium of the International Committee on Aeronautical Fatigue (ICAF 2015), Helsinki, Finland, June 2015
2015
Approach, validation, and advantages of using DIC to characterize a materials quasi-static indentation test
Conference Paper
R. Desnoo, C.D. Rans, X. Huang
in Proc. 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark, July 2015
2015
Philosophy of multiple-site damage analysis for fibre metal laminate structures
Conference Paper
W. Wang, C.D. Rans, R.C. Alderliesten, and R. Benedictus
in Proc. 28th Symposium of the International Committee on Aeronautical Fatigue (ICAF 2015), Helsinki, Finland, June 2015
2015