Fatigue Behavior of Multi-Spot Welded Joints in Thermoplastic Composites
Supervised MSc Thesis
C.A. Meijerman
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2021
Parametric analysis of mechanical fastener disbond arrest features in bonded joints
Supervised MSc Thesis
Nathan van 't Hof
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2021
Mechanical Behaviour of PA2241FR used in Selective Laser Sintering
Supervised MSc Thesis
Tobias Haegens
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2021
Damage Tolerant Design for Additive Manufacturing: An experimental study on the fatigue behaviour of stretch dominated AlSi10Mg multiple load path specimens
Supervised MSc Thesis
Mark Hofwegen
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2021
Learning from Nature's Failures: Mimicking hierarchy in natural structures to create damage-tolerant lattice structures
Supervised MSc Thesis
Katharina Ertman
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2020
Thickness distribution optimization in flat panels for damage tolerance using genetic algorithms
Supervised MSc Thesis
Bart van der Lee
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2020
Towards the Certification of Bonded Primary Fiber Metal Laminate Structures by Bolted Disbond Arrest Features
Supervised MSc Thesis
Ivar van Teeseling
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2019
Topology Optimization for Damage Tolerance
Supervised MSc Thesis
Bram Lagerweij
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2019
The effect of nodal topology on cellular solid mechanics
Supervised MSc Thesis
Derron van Helvoort
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2019
Additive Manufacturing of Liquid Crystal Polymers
Supervised MSc Thesis
Caroline Houriet
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2019
Critical Parameters in Mode I Interlaminar Fracture Toughness Testing of Thermoplastic Composite Materials
Supervised MSc Thesis
Kenny R. Peters
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Disbond arrest in fibre metal laminates
Supervised MSc Thesis
Robert Hangx
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Fatigue crack growth in Selective Laser Melted Ti-6Al-4V
Supervised MSc Thesis
Jef Michielssen
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Fracture Toughness of Aerospace Structures: On the Use of Redundant Lattice Structures
Supervised MSc Thesis
Tijs de Boer
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Fatigue Crack Initiation Behaviour of Additive Manufactured Ti-6Al-4V
Supervised MSc Thesis
Thomas Cheylus
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Energy Absorption of Additively Manufactured Lattices: On biomimetic abstraction of structural principles toward increased energy absorption in lattice structures
Supervised MSc Thesis
Mika Bots
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
Methods of Improving the Post Shear-Buckled Stiffness of Glare
Supervised MSc Thesis
Andrew Marshall
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2017
The effect of stress ratio on the fatigue behavior of additively manufactured porous biomaterials
Supervised MSc Thesis
Joep de Krijger
MSc Thesis, Dept. Materials Science & Engineering, Delft University of Technology
2016
An investigation into the fatigue behavior of micro-cracks in resin rich regions of composite laminates produced by liquid infusion
Supervised MSc Thesis
Evgeni S. Zhelyazkov
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2016
Assessing Composite and Fibre Metal Laminate Materials for Automotive Applications Through Impact and Quasi-Static Indentation Testing
Supervised MSc Thesis
Robert De Snoo
M.Sc. thesis, Dept. of Mechanical and Aerospace Engineering, Carleton University
2015
Development of a Fatigue Damage Propagation Model for Fibre Metal Laminates with Locally Tailored Fibre Layers
Supervised MSc Thesis
Jeremy Atkinson
M.Sc. thesis, Dept. of Mechanical and Aerospace Engineering, Carleton University
2014
Delamination of Bonded Repairs: A Damage Tolerance Approach
Supervised MSc Thesis
John-Alan Pascoe
MSc Thesis, Dept. Aerospace Structures and Materials, Delft University of Technology
2012